Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€5
  • ‎€4762
23.23 (28.11 inc Vat)
Safely store and transport your Revar Cine Rota Pola 6.6 x 6.6" filter tray with this Filter Tray Pouch from Alan Gordon Enterprises. The pouch is designed to fit the 6.6 x 6.6" tray and filter combination, and its top flap closes to secure it from dust and scratches. There is a clear window in the top flap, so you can identify your filter tray when it's packed up.
In stock
+

Minimum quantity for "Alan Gordon Enterprises Filter Tray Pouch for Rota Pola 6.6 x 6.6"" is 1.


460.28 (556.94 inc Vat)
Built into a single-stage self-contained unit, the Alan Gordon Enterprises Revar Cine Rota Pola Rota-Tray 4 x 5.65" with Circular Polarizer is a compact, easily rotatable polarizing solution for most matte boxes that accept 4 x 5.65" filters. Rather than requiring a full 4 x 5.65" glass filter, the Rota-Tray uses an included 138mm diameter filter which sits inside the rotating tray. If the polarizer needs to be adjusted, simply rotate one of the geared wheels, which extend from the top of the tray on either side.
In stock
+

Minimum quantity for "Alan Gordon Enterprises Revar Cine Rota Pola Rota-Tray 4 x 5.65" with Circular Polarizer" is 1.


230.14 (278.47 inc Vat)
If you own an unmounted 138mm polarizing filter, you can use this Alan Gordon Enterprises Revar Cine Rota-Pola Tray to install it into a matte box that accepts 4 x 5.65" filters. The tray has a lightweight and rigid aluminum construction, and rotating the gears that extend from either side of the tray will adjust the polarizer in order to easily achieve your desired result. The advantage of this setup over a standard filter is apparent when the matte box is mounted on LWS rods. This setup usually prevents the full 360° rotation of 4 x 5.65 filters, but with the Rota-Pola solution, the filter rotation takes place inside the tray, so there is no interference with LWS rods. Additionally, matte boxes that don't feature rotating filter stages will now be useable in shots that require a rotating polarizer.
In stock
+

Minimum quantity for "Alan Gordon Enterprises Revar Cine Rota-Pola Tray for 4 x 5.65" Matte Boxes" is 1.


171.40 (207.39 inc Vat)
The 104mm Clamp Adapter for LMB-6 Matte Box from ARRI is used to attach the LMB-6 to a lens with a 104mm front diameter. The adapter attaches to the matte box using its keyhole-type slots and it fastens to the lens via its screw-on clamp center. This adapter has a rectangular outer shape and a circular inner design.
In stock
+

Minimum quantity for "ARRI 104mm Clamp Adapter for LMB-6 Matte Box" is 1.


171.40 (207.39 inc Vat)
The 125mm Clamp Adapter for LMB-6 Matte Box from ARRI is used to attach the LMB-6 to a lens with a 125mm front diameter. The adapter attaches to the matte box using its keyhole-type slots and it fastens to the lens via its screw-on clamp center. This adapter has a rectangular outer shape and a circular inner design.
In stock
+

Minimum quantity for "ARRI 125mm Clamp Adapter for LMB-6 Matte Box" is 1.


171.40 (207.39 inc Vat)
The 134mm Clamp Adapter for LMB-6 Matte Box from ARRI is used to attach the LMB-6 to a lens with a 134mm front diameter. The adapter attaches to the matte box using its keyhole-type slots, and it fastens to the lens via its screw-on clamp center. This adapter has a rectangular outer shape and a circular inner design.
In stock
+

Minimum quantity for "ARRI 134mm Clamp Adapter for LMB-6 Matte Box" is 1.


171.40 (207.39 inc Vat)
The 136mm Clamp Adapter for LMB-6 Matte Box from ARRI is used to attach the LMB-6 to a lens with a 136mm front diameter. The adapter attaches to the matte box using its keyhole-type slots, and it fastens to the lens via its screw-on clamp center. This adapter has a rectangular outer shape and a circular inner design.
In stock
+

Minimum quantity for "ARRI 136mm Clamp Adapter for LMB-6 Matte Box" is 1.


171.40 (207.39 inc Vat)
The 156mm Clamp Adapter for LMB-6 Matte Box from ARRI is used to attach the LMB-6 to a lens with a 156mm front diameter. The adapter attaches to the matte box using its keyhole-type slots, and it fastens to the lens via its screw-on clamp center. This adapter has a rectangular outer shape and a circular inner design.
In stock
+

Minimum quantity for "ARRI 156mm Clamp Adapter for LMB-6 Matte Box" is 1.


171.40 (207.39 inc Vat)
The 162mm Clamp Adapter for LMB-6 Matte Box from ARRI is used to attach the LMB-6 to a lens with a 162mm front diameter. The adapter attaches to the matte box using its keyhole-type slots, and it fastens to the lens via its screw-on clamp center. This adapter has a rectangular outer shape and a circular inner design.
In stock
+

Minimum quantity for "ARRI 162mm Clamp Adapter for LMB-6 Matte Box" is 1.


365.15 (441.83 inc Vat)
The 2-Filter Stage Guide from ARRI holds up to two filters when used as a component of the LMB-6 lightweight matte box. Constructed of machined aluminum, this guide consists of two pieces that are sandwiched between the lens clamp adapter and the matte box hood (neither included). It may be combined with another 2- or 3-filter stages to accommodate additional filters. The 2-Filter Stage Guide has independent locks for each filter frame, making it easier to remove the frames one at a time if so desired.
In stock
+

Minimum quantity for "ARRI 2-Filter Stage Guide for LMB-6 Matte Box" is 1.


469.48 (568.07 inc Vat)
The 3-Filter Stage Guide from ARRI holds up to three filters when used as a component of the LMB-6 lightweight matte box. Constructed of machined aluminum, this guide consists of two pieces that are sandwiched between the lens clamp adapter and the matte box hood (neither included). It may be combined with another 2- or 3-filter stages to accommodate additional filters. The 3-Filter Stage Guide has independent locks for each filter frame, making it easier to remove the frames one at a time if so desired.
In stock
+

Minimum quantity for "ARRI 3-Filter Stage Guide for LMB-6 Matte Box" is 1.


51.42 (62.22 inc Vat)
Use this 3/8"-16 Accessory Shoe from ARRI to add a mounting option to your LMB-25 or LMB-6 matte box. The shoe screws onto the matte box, giving you one 3/8"-16 threaded mounting hole. This adapter is particularly handy for mounting rangefinders or other measuring devices.
In stock
+

Minimum quantity for "ARRI 3/8"-16 Accessory Shoe for LMB-25/LMB-6 Matte Box" is 1.


208.66 (252.48 inc Vat)
In stock
+

Minimum quantity for "ARRI 4 x 4" Filter Frame" is 1.


238.46 (288.54 inc Vat)
In stock
+

Minimum quantity for "ARRI 4 x 4" Filter Frame (Geared)" is 1.


111.78 (135.25 inc Vat)
The 4 x 4" Filter Frame for LMB 4x5 from ARRI holds one 4 x 4" filter. This frame is compatible with ARRI LMB 4x5, LMB-25, and MB-19 matte boxes. A recessed spring lock secures the filter within the frame.
In stock
+

Minimum quantity for "ARRI 4 x 4" Filter Frame for LMB 4x5" is 1.


245.92 (297.56 inc Vat)
This ARRI 4 x 5.65" Anti Reflection Filter Frame for Select ARRI Matte Boxes enables mounting two glass filters and tilting the frame to minimize internal reflections. The frame fits into the 2-stage filter slots of ARRI's LMB 4x5, LMB-25, LMB-15, and LMB-5. It features a spring-loaded filter catch and is not geared.
In stock
+

Minimum quantity for "ARRI 4 x 5.65" Anti Reflection Filter Frame for Select ARRI Matte Boxes (Non-Geared)" is 1.


1,512.76 (1,830.44 inc Vat)
This Basic SMB-2 Matte Box Module from ARRI is composed of the 4:3 sunshade, a non-tilting extension module, and an R2 ring–compatible back plate. A mounting arm is not included nor are any filter stages. The SMB-2 has a modular design, and is ready to accept stackable 4" x 5.65" filter stages, either the 19mm or 15mm rod mounting arm, and other separately available components as you wish. The SMB-2's swing-away design provides easy access to your lens without having to slide the matte box off the rods.
In stock
+

Minimum quantity for "ARRI 4" x 5.65" SMB-2 Basic Matte Box Module" is 1.


1,877.90 (2,272.26 inc Vat)
The SMB-2 Tilt Matte Box Module from ARRI is composed of a 4:3 sunshade, a tilting extension module, and an R2 ring–compatible back plate. A mounting arm is not included nor are any filter stages or tilting filter ring. The SMB-2 has a modular design, and is ready to accept stackable 4" x 5.65" filter stages, either the 19mm or 15mm rod mounting arm, and other separately available components as you wish. The SMB-2's swing-away design provides easy access to your lens without having to slide the matte box off the rods.
In stock
+

Minimum quantity for "ARRI 4" x 5.65" SMB-2 Tilt Studio Matte Box" is 1.


201.20 (243.45 inc Vat)
The 6.6 x 6.6" F1 Filter Frame from ARRI holds one 6.6 x 6.6" filter. This frame is compatible with ARRI LMB-4A and LMB-6 lightweight matte boxes. A recessed spring lock holds the filter within the frame.
In stock
+

Minimum quantity for "ARRI 6.6 x 6.6" F1 Filter Frame" is 1.


216.11 (261.49 inc Vat)
The Accessory Adapter for SMB-1/2 from ARRI is compatible with the SMB-1 and SMB-2 matte boxes. Use it to attach a rangefinder, French flag, or other accessory to the matte box. The adapter mount slides for optimal balance and placement.
In stock
+

Minimum quantity for "ARRI Accessory Adapter for SMB-1/2" is 1.


544.00 (658.24 inc Vat)
The ARRI LMB-6 Accessory Set provides an array of accessories to complement the LMB-6 Lightweight Matte Box. This ARRI kit includes five mattes, two top/bottom flag holders, a filter tray catcher, and one accessory holder. The mattes and pair of flag holders are used to further control the amount of light entering your lens. The tray catcher secures the matte box's filter trays when using your camera on a crane, gimbal, picture car, or when otherwise in motion. The 3/8"-16 adapter in this set can be used to mount a rangefinder or other accessory to the LMB-6 matte box.
In stock
+

Minimum quantity for "ARRI Accessory Set for LMB-6 Matte Box" is 1.


797.36 (964.81 inc Vat)
The ARRI SMB-2 Accessory Set provides an assortment of accessories to complement the SMB-2 4 x 5.65" Studio Matte Box with 4:3 sunshade. This ARRI kit includes five spherical (4:3) mattes, five anamorphic (2:1) mattes, a short whip for a geared filter stage, two top/bottom flag holders, and one accessory holder. Use these accessories to further control the amount of light entering your lens, whether you're working in spherical or anamorphic mode.
In stock
+

Minimum quantity for "ARRI Accessory Set for SMB-2 Matte Box (4:3)" is 1.


163.94 (198.37 inc Vat)
In stock
+

Minimum quantity for "ARRI Adapter Ring for R1 to R3 Filter Ring" is 1.


163.94 (198.37 inc Vat)
In stock
+

Minimum quantity for "ARRI Adapter Ring for R1/R2 138mm Round Filter" is 1.