Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€1
  • ‎€3636
25.33 (30.65 inc Vat)
This ARRI Beveled Marking Disk is compatible with standard and two-speed follow focus knobs, and the WCU-3 hand unit knob. Use a non-permanent marker to apply temporary focus marks to its surface. This round plastic unit may be used as a replacement or additional marking disk.
In stock
+

Minimum quantity for "ARRI Beveled Marking Disk for WCU-3 & Standard/2-Speed FF Knob" is 1.


21.61 (26.15 inc Vat)
This ARRI Beveled Marking Disk is compatible with the WFU-3 hand unit knob. Use a non-permanent marker to apply temporary focus marks to its surface. This round plastic unit may be used as a replacement or additional marking disk.
In stock
+

Minimum quantity for "ARRI Beveled Marking Disk for WFU-3 Hand Unit Knob" is 1.


178.85 (216.41 inc Vat)
In stock
+

Minimum quantity for "ARRI Coupling for Flexible Shaft" is 1.


298.08 (360.68 inc Vat)
The ARRI Extension for Focus Knob Inserts into the focus knob socket of ARRI studio follow focus systems. This allows you to mount your focus knob approximately four inches away from the lens, which is often a necessity when working with studio matte boxes. The extension features a built-in locking lever for securing a compatible follow focus knob.
In stock
+

Minimum quantity for "ARRI Extension for Focus Knob" is 1.


178.85 (216.41 inc Vat)
The ARRI FF Gear 0.8 Module, 35-Tooth, 45mm can be used with most ARRI follow focus systems. This deep gear is designed for use with large-barrel primes and zooms or with vintage lenses that extend when pulling focus.
In stock
+

Minimum quantity for "ARRI FF Gear 0.8 Module, 35-Tooth, 45mm" is 1.


178.85 (216.41 inc Vat)
The ARRI FF Gear 0.8 Module, 43-Tooth, 45mm can be used with most ARRI follow focus systems. This deep gear is designed for use with large-barrel primes and zooms or with vintage lenses that extend when pulling focus.
In stock
+

Minimum quantity for "ARRI FF Gear 0.8 Module, 43-Tooth, 45mm" is 1.


3,070.22 (3,714.97 inc Vat)
The sleek, black-finished FF-4 15mm Follow Focus Set (Black Edition) from ARRI includes a single-sided follow focus, one standard knob, a gear for prime lenses and smaller zooms, four marking disks, and a speed crank. This robust, economical unit includes an adapter enabling it to snap onto 15mm lightweight support rods. A hard-sided carrying case is included to transport and protect all the components in the set.
In stock
+

Minimum quantity for "ARRI FF-4 15mm Follow Focus Set (Black Edition)" is 1.


3,070.22 (3,714.97 inc Vat)
The sleek, black-finished FF-4 19mm Follow Focus Set (Black Edition) includes a single-sided follow focus, one standard knob, a gear for prime lenses and smaller zooms, four marking disks, and a speed crank. This robust, economical unit includes an adapter enabling it to snap onto 19mm studio rods. Remove the adapter to slide the FF-4 onto a pair of lightweight 15mm rods (rods not included). A hard-sided carrying case is included to transport and protect all the components in the set.
In stock
+

Minimum quantity for "ARRI FF-4 19mm Follow Focus Set (Black Edition)" is 1.


2,161.08 (2,614.91 inc Vat)
The sleek, black-finished ARRI FF-4 Basic Follow Focus Unit consists of a single-sided follow focus with one standard knob. This robust, economical unit slides onto a pair of lightweight 15mm rods (rods not included). The FF-4 is designed with a 1:2 knob-to-gear ratio for smooth, accurate focus pulls on a variety of lenses. A required focus gear is not included with this unit.
In stock
+

Minimum quantity for "ARRI FF-4 Basic Follow Focus Unit (Black Edition)" is 1.


1,572.37 (1,902.57 inc Vat)
ARRI's FF-5 Cine Follow Focus Base is designed to snap onto a pair of 15 or 19mm lightweight rods. An adapter is required to use the FF-5 Cine with 15 or 19mm studio rod systems (not included). This base unit of the FF-5 does not come with any knobs or lens gears (available separately).
In stock
+

Minimum quantity for "ARRI FF-5 Cine Follow Focus Base" is 1.


2,243.05 (2,714.09 inc Vat)
The ARRI FF-5 Cine Set Pro is a complete follow focus kit including a cine follow focus base, left- and right-sided standard focus knobs, two lens gears, one speed crank, one short whip, and 10 marking disks. Use the FF-5 Cine's integrated snap-on bridge mechanism to mount the follow focus to ARRI lightweight support rods. A bridgeplate adapter is required to use the FF-5 Cine with 15 or 19mm studio rod systems (not included). Having a gear ratio of 2:1, the FF-5 Cine is designed for cine-style lenses, with one turn of the focus knob resulting in two turns of the focus gear. This gear ratio suits the generously-spaced focus marks found on most cine lenses.
In stock
+

Minimum quantity for "ARRI FF-5 Follow Focus Cine Set Pro" is 1.


1,572.37 (1,902.57 inc Vat)
ARRI's FF-5 HD Follow Focus Base is designed to snap onto a pair of 15 or 19mm lightweight rods. An adapter is required to use the FF-5 Cine with 15 or 19mm studio rod systems (not included). This base unit of the FF-5 does not come with any knobs or lens gears (available separately).
In stock
+

Minimum quantity for "ARRI FF-5 HD Follow Focus Base" is 1.