Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€0
  • ‎€6527
1,266.09 (1,531.97 inc Vat)
Designed for a realm where functionality trumps all concerns, the Arca-Swiss C1 Cube simultaneously achieves mastery of control with an appearance approaching the status of jewelry. The head allows users to place their heavy cameras with a degree of accuracy they could never have had before except in exchange for a large increase in weight. There are still plenty of shooters around wishing to actually travel with their best stuff, and no geared head seemed practical to endure on one's person before the C1 arrived.
The C1 Cube has finely calibrated ungeared panning adjustments under and above ±28° x-y geared axes with adjustable tension. Why two panoramic axes? So that you can first center the Cube's controls to your position with the bottom axis, then readjust the camera to point dead ahead with the upper axis. The gears' knobs have a little scrap of rubber running around them, to give pinpoint control while wearing gloves without being broad enough to obstruct the head's movements. On the bottom of it all, there's a third (ungeared) hinge which allows 62° of tilt so that any camera can reach the 90° vertical position.
On top of the C1 you'll find 2 sensitive bubble levels and an Arca-Swiss flip-lock quick release clamp which has its own advantages in compactness and security. Given all that's going on here, the weight's astonishingly low; just 2.03 lbs (925g), as light as could be imagined and considerably more compact than other geared heads.
The C1's ultimate advantage lies in the world of macro shooting, where its design allows far fewer focusing readjustments while creating images. You see, all other geared heads (and all other 3-way pan/tilt heads for that matter) execute movements upon circular axes which are centered far below the actual camera-your gear moves along the outside of a sphere. The C1 Cube, however, places the camera inside of a sphere. It is almost as if the x/y axes meet at a point upon the image plane itself, with all the camera rotating around a stationary image plane. This remarkably difficult engineering feat was chosen to minimize movements of the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head w / Arca-Type Flip-Lock Quick Release" is 1.


1,356.41 (1,641.26 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style with GP (Geared Panning) quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release with GP (Geared Panning)" is 1.


632.67 (765.53 inc Vat)
Tilt and pivot your camera in three-dimensional space with the Arca-Swiss d4 Tripod Head with a MonoballFix Quick Release, which combines the advantages of a spherical head and a 3D tilt head in one compact system.
In stock
+

Minimum quantity for "Arca-Swiss d4 Tripod Head with a MonoballFix Quick Release (Geared)" is 1.


1,157.29 (1,400.32 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss MonoballFix system quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with MonoballFix Quick Release" is 1.


543.96 (658.19 inc Vat)
The Monoball Z1g+ Ball Head with Flip Lock from Arca-Swiss has a heavy-duty load capacity of 132 lb, and employs a Motion Related Gravity Control system for variable and bi-directional friction control that is independently operative on both axes. The head is smaller and lighter than its predecessor, the Z1.
In stock
+

Minimum quantity for "Arca-Swiss Monoball Classic Z1g+ Ball Head with Flip Lock" is 1.


1,330.18 (1,609.52 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. This edition of the Cube comes in a fitted, stylish leather case. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release and Leather Case" is 1.


1,171.46 (1,417.47 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release" is 1.


573.06 (693.40 inc Vat)
The Cambo SCH-U 3-D Gearhead is a heavy-duty studio head with gear-driven forward tilt intended for studio cameras weighing up to 55 lb (25 kg) on Cambo studio stands with U-4 or UBA crossarms. The worm drive geared forward tilt is inherently self-locking, and lateral tilt is controlled with a damped, split-casting type lock and splined lock handle. Panning is achieved through the rotating camera stage and locked in position with a second splined lock handle. In concert, the controls of the Cambo SCH-U provide safe, reliable positioning of heavy studio cameras in a wide range of configurations.
In stock
+

Minimum quantity for "Cambo SCH-U 3-D Gearhead" is 1.


1,793.69 (2,170.36 inc Vat)
Linhof 3662 Overview The Linhof 3D Micro Leveling Head with Dovetail Track is designed for precision cameras up to 22 lb that require accurate micro...
In stock
+

Minimum quantity for "Linhof 3D Micro Leveling Head with Dovetail Track" is 1.


696.75 (843.07 inc Vat)
Linhof Profi II Overview A professional medium sized precision ballhead, the Linhof features oversized locking knobs for secure positioning and...
In stock
+

Minimum quantity for "Linhof Profi-II Ballhead with Independent Panning Lock (Quick Release) - Supports 17.60 lb (7.98 kg)" is 1.


1,434.14 (1,735.31 inc Vat)
Designed for a realm where functionality trumps all concerns, the Arca-Swiss C1 Cube simultaneously achieves mastery of control with an appearance approaching the status of jewelry. The head allows users to place their heavy cameras with a degree of accuracy they could never have had before except in exchange for a large increase in weight. There are still plenty of shooters around wishing to actually travel with their best stuff, and no geared head seemed practical to endure on one's person before the C1 arrived.
The C1 Cube has finely calibrated ungeared panning adjustments under and above ±28° x-y geared axes with adjustable tension. Why two panoramic axes? So that you can first center the Cube's controls to your position with the bottom axis, then readjust the camera to point dead ahead with the upper axis. The gears' knobs have a little scrap of rubber running around them, to give pinpoint control while wearing gloves without being broad enough to obstruct the head's movements. On the bottom of it all, there's a third (ungeared) hinge which allows 62° of tilt so that any camera can reach the 90° vertical position.
On top of the C1 you'll find 2 sensitive bubble levels and an Arca-Swiss flip-lock quick release clamp which has its own advantages in compactness and security. Given all that's going on here, the weight's astonishingly low; just 2.03 lbs (925g), as light as could be imagined and considerably more compact than other geared heads.
The C1's ultimate advantage lies in the world of macro shooting, where its design allows far fewer focusing readjustments while creating images. You see, all other geared heads (and all other 3-way pan/tilt heads for that matter) execute movements upon circular axes which are centered far below the actual camera-your gear moves along the outside of a sphere. The C1 Cube, however, places the camera inside of a sphere. It is almost as if the x/y axes meet at a point upon the image plane itself, with all the camera rotating around a stationary image plane. This remarkably difficult engineering feat was chosen to minimize movements of the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
This version of the C1 Cube is delivered with a gorgeous, handcrafted leather case with permanently-attached shoulder strap.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head w / Flip-Lock Quick Release & Leather Case" is 1.


1,042.53 (1,261.46 inc Vat)
The 5.1" tall, Arca-type compatible Full Precision Controlled Geared Head from Cambo has all the same movements as a ball head, but with geared movements that you can move in precise increments to position your camera exactly where you want it. With cameras weighing up to 13.2 lb, you can laterally tilt the 2.8 lb head from -110 to +30° and pivot between the same ranges of -110 to +30°. At the same time, it has two rotations on the top and bottom of the head. All the movements are geared except for the bottom rotation, which is free-moving and manually controlled. The geared movements can also be disengaged to move freely, but you can add tension to the movements as well. Four bubble levels located on the top and the bottom of the head are provided to ensure straight horizons every time you situate your shot.
In stock
+

Minimum quantity for "Cambo Full Precision Controlled Geared Head" is 1.