Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€0
  • ‎€6527
119.20 (144.23 inc Vat)
The blue AirHed Pro Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Ball Head (Blue)" is 1.


119.20 (144.23 inc Vat)
The gray AirHed Pro Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Ball Head (Gray)" is 1.


111.75 (135.22 inc Vat)
The blue AirHed Pro Lever Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Lever Ball Head (Blue)" is 1.


111.77 (135.24 inc Vat)
The gray AirHed Pro Lever Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Lever Ball Head (Gray)" is 1.


126.67 (153.27 inc Vat)
The AirHed Vu Ball Head from 3 Legged Thing is a ball head with a load capacity of 88.2 lb that can be attached to tripods or other support systems that feature a 3/8"-16 mount. The head's magnesium alloy casing features a unique vision panel that allows the inner mechanism to be seen. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, and fully tilted to a vertical position or returned to its upright position. The base of the head incorporates an independent panning lock knob.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Vu Ball Head (Blue)" is 1.


126.67 (153.27 inc Vat)
The AirHed Vu Ball Head from 3 Legged Thing is a ball head with a load capacity of 88.2 lb that can be attached to tripods or other support systems that feature a 3/8"-16 mount. The head's magnesium alloy casing features a unique vision panel that allows the inner mechanism to be seen. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, and fully tilted to a vertical position or returned to its upright position. The base of the head incorporates an independent panning lock knob.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Vu Ball Head (Gray)" is 1.


59.62 (72.14 inc Vat)
The 4.3" tall" BH-05 Ball Head from Acebil is aluminum constructed with a main locking knob and an independent panning lock. You can disengage the main knob, which enables you to move the ball to the required angle and also at a 90° angle. The 1.25 lb head has a load capacity of 33 lb, which is suitable for most cameras on the market as well as a proprietary quick release system that includes a quick release plate with a 1/4"-20 mount.
In stock
+

Minimum quantity for "Acebil BH-05 Ball Head" is 1.


89.42 (108.20 inc Vat)
With precise movements and simple controls, the BH-08 Professional Photo Aluminum Ball Head from Acebil is an intuitive option for supporting your camera. This model features a load capacity of 17.6 lb for stability when using heavy systems and it measures 3.5" high. It is lightweight as well at just 0.7 lb and the quick release system is Arca-type compatible. For adjustments, the BH-08 has a large knob that is a part of the Friction Control System for the ball head and a 360° panning function with an independent lock. Additionally, users can easily adjust the position of the camera on the ball head and even move it downward up to 90°.
In stock
+

Minimum quantity for "Acebil BH-08 Professional Photo Aluminum Ball Head" is 1.


119.23 (144.27 inc Vat)
With precise movements and simple controls, the BH-12 Professional Photo Aluminum Ball Head from Acebil is an intuitive option for supporting your camera. This model features a load capacity of 26.4 lb for stability when using heavy systems and it measures 3.9" high. It is lightweight as well at just 0.9 lb and the quick release system is Arca-type compatible. For adjustments, the BH-12 has a large knob that is a part of the Friction Control System for the ball head and a 360° panning function with an independent lock. Additionally, users can easily adjust the position of the camera on the ball head and even move it downward up to 90°.
In stock
+

Minimum quantity for "Acebil BH-12 Professional Photo Aluminum Ball Head" is 1.


149.04 (180.34 inc Vat)
With precise movements and simple controls, the BH-15 Professional Photo Aluminum Ball Head from Acebil is an intuitive option for supporting your camera. This model features a load capacity of 26.4 lb for stability when using heavy systems and it measures 4.3" high. It is lightweight as well at just 1.25 lb and the quick release system is Arca-type compatible. For adjustments, the BH-15 has a large knob that is a part of the Friction Control System for the ball head and a 360° panning function with an independent lock. Additionally, users can easily adjust the position of the camera on the ball head and even move it downward up to 90°.
In stock
+

Minimum quantity for "Acebil BH-15 Professional Photo Aluminum Ball Head" is 1.


52.16 (63.11 inc Vat)
The 4.3" tall PG-2 Pistol Grip from Acebil has a squeeze trigger that you can grip to unlock the ball and be able to move the head freely. Once the trigger is released, the head locks into the desired position. This one-handed operation design allows you to quickly position and reposition or follow a subject with ease. The 1.25 lb pistol grip has a load capacity of 33 lb, which is suitable for most cameras on the market as well as a proprietary quick release system that includes a quick release plate with a 1/4"-20 mount.
In stock
+

Minimum quantity for "Acebil PG-2 Pistol Grip" is 1.


311.45 (376.85 inc Vat)
The Acratech GP-ss Ballhead has the ability to function as a gimbal head and as a panoramic head, providing you with incredible positioning flexibility and stability for your equipment. Gimbal heads are desirable when shooting with telephoto lenses, especially when following moving objects.
The GP-ss Ballhead is designed with a small diameter base diameter of 2.08" to allow it to be used with travel-type tripods where the legs fold around the tripod head. The smaller base diameter allows the tripod legs to fold more compactly.
Even when using your tripod on rocky, uneven terrain the GP-ss Ballhead allows you to pan parallel to the horizon, eliminating the need to carry a separate leveling base to create accurate panoramic images.
In stock
+

Minimum quantity for "Acratech GP-ss Ballhead" is 1.


336.05 (406.62 inc Vat)
The Acratech GP-ss Ballhead With Lever Clamp has the ability to function as a gimbal head and as a panoramic head, providing you with incredible positioning flexibility and stability for your equipment. Gimbal heads are desirable when shooting with telephoto lenses, especially when following moving objects. Rather than a rubber knob, this model features a locking lever for securing the Arca Swiss-style clamp that constitutes the quick-release element.
The GP-ss Ballhead is designed with a small diameter base of 2.08" to allow it to be used with travel-type tripods where the legs fold around the tripod head. The smaller base diameter allows the tripod legs to fold more compactly.
Even when using your tripod on rocky, uneven terrain the GP-ss Ballhead allows you to pan parallel to the horizon, eliminating the need to carry a separate leveling base to create accurate panoramic images.
In stock
+

Minimum quantity for "Acratech GP-ss Ballhead With Lever Clamp" is 1.


331.61 (401.25 inc Vat)
The lightweight 1 lb GXP Ball Head with Knob Clamp from Acratech has a 3-in-1 feature designed to have two more functions other than just your conventional ball head. The Arca-type clamp on the head is removable from its stem, and it is mountable in the reverse to the base of the ball head. With the clamp removed, the ball head's stem has the same 3/8"-16 mount as the base, which includes a reducer bushing. The clamp itself has a single bubble level that allows you to balance and level out the ball. At the same time, you can unlock the independent pan lock and rotate lenses as large as 400mm and equipment weighing up to 50 lb. Together with a laser-engraved numbered scale, you can precisely create panoramic images by turning the ball head at incremental stops.
In stock
+

Minimum quantity for "Acratech GXP Ball Head with Knob Clamp" is 1.


364.40 (440.92 inc Vat)
The lightweight 1 lb GXP Ball Head with Lever Clamp from Acratech has a 3-in-1 feature designed to have two more functions other than just your conventional ball head. The Arca-type clamp on the head is removable from its stem, and it is mountable in the reverse to the base of the ball head. With the clamp removed, the ball head's stem has the same 3/8"-16 mount as the base, which includes a reducer bushing. The clamp itself has a single bubble level that allows you to balance and level out the ball. At the same time, you can unlock the independent pan lock and rotate lenses as large as 400mm and equipment weighing up to 50 lb. Together with a laser-engraved numbered scale, you can precisely create panoramic images by turning the ball head at incremental stops.
In stock
+

Minimum quantity for "Acratech GXP Ball Head with Lever Clamp" is 1.


270.47 (327.27 inc Vat)
The Acratech Long Lens Head is designed to support super-telephoto lenses as long as 600mm f/4.0. The CNC-machined Long Lens Head weighs less than 1 lb and features an Arca-style quick-release clamp that's compatible with plates from manufacturers such as Arca-Swiss, Kirk, R.R.S., and many others.
The clamp is indexable, which means it can be rotated in 90° increments by loosening the rubberized knob. This enables easy use of cameras without lenses that have lens collars, and facilitates 90° sideways tilt (rather than front-to-back tilt). While the head is specifically designed for use with extremely long telephoto lenses that are mounted with a lens collar, this feature ensures that even if you're using multiple cameras in the field, you don't need to transport other heads besides the Long Lens Head when you want to mount a camera body (with a smaller lens) directly to your tripod & head.
The tension control is fully adjustable to suit heavier and lighter loads, and the head tilts 90° in two directions. Degree markings are engraved, for precise control over panoramic adjustments. All knobs are secured so they cannot vibrate loose and fall off.
In stock
+

Minimum quantity for "Acratech Long Lens Head" is 1.


372.57 (450.81 inc Vat)
Support your large telephoto lens with the Acratech Long Lens Head with Leveling Base Kit from . This setup will have you moving freely while keeping the lens perfectly balanced, which you could not do handholding the lens otherwise.
In stock
+

Minimum quantity for "Acratech Long Lens Head with Leveling Base Kit" is 1.


286.87 (347.11 inc Vat)
The Acratech Ultimate Ball Head With QR Locking Lever Clamp is the result of innovative design, created for combining low mass with incredible stopping power. With the included Quick Release Locking Lever Clamp, it's an ideal head for those who don't require the progressive tension control of the heavier (and more expensive) Arca-Swiss B1. The satin black anodized finish and engraved degree markings contribute to the solid precision look and feel of this impressive camera support. The ball operates without oil or grease, so it will not attract or hold dirt and debris. The knobs are all secured so that they can't vibrate loose and fall off.
The innovative design of the Acratech gives the photographer full access to 25% of a sphere at any time, and it is entirely capable of providing support in any direction so long as the tripod legs are not overwhelmed. This version of the V2 includes a built-in spirit level aiding in tripod and camera alignment.
In stock
+

Minimum quantity for "Acratech Ultimate Ball Head With QR Locking Lever Clamp" is 1.


262.27 (317.35 inc Vat)
The Acratech Ultimate Ballhead is the result of innovative efficient design, created for combining low mass with incredible stopping power. Available with or without an installed Arca-type quick release clamp, it is an ideal head for those that do not require a progressive tension control.
In stock
+

Minimum quantity for "Acratech Ultimate Ballhead" is 1.


245.88 (297.51 inc Vat)
The Acratech Ultimate Ballhead is the most efficient design ever created for combining low mass with incredible stopping power. Available with or without an installed Arca-type quick release clamp, it is an ideal head for those that do not require the progressive tension control of the heavier (and more expensive) Arca-Swiss B1. It can be combined with a Wimberley Sidekick to give exceptional gimbal-type control of all but the largest of 35mm & medium format supertelephoto lenses.
The innovative design of the Acratech gives the photographer full access to 25% of a sphere at any time, and it is entirely capable of providing support in any direction so long as your tripod legs are not overwhelmed. It may seem odd that such a small device would work well on a large tripod such as a 1500 series Gitzo, but in fact it does just that.
Occasionally it is necessary to reorient the controls of the Acratech to access a particular angle, because the clamp is mounted at a 45° angle to the ballhead. Thus, if one needs to point straight down on one shot and then five degrees backward on the next, one must reorient the clamp 180°. This is quickly mastered and not a detriment to ownership, as the benefits of traveling with such a lightweight design are realized every time it is carried.
This version includes a quick release clamp, with safety detent pin, and all rubber covered left-side control knobs.
Note: A quick release plate is not included, and Acratech offers a range of camera-specific plates, as well as a standard 1/4"-20 plate. Or can be used with any "Arca-Swiss type" plate, available from Arca-Swiss, Foba, NPC, Novoflex & Wimberley.
In stock
+

Minimum quantity for "Acratech Ultimate Ballhead w/ Quick Release w/ Detent Pin & Left Rubber Knobs" is 1.


49.11 (59.42 inc Vat)
The aluminum-constructed Ball Head with Quick Release from ALZO has a single-action lever that you can unlock, so you can control the movement of the ball and the rotation of the head at the same time. The head, which has a load capacity of 15 lb, includes a quick release plate that is compatible with other RC2 quick release systems, and it mounts onto tripods with a 3/8"-16 threaded mount.
In stock
+

Minimum quantity for "ALZO Ball Head with Quick Release" is 1.


1,266.09 (1,531.97 inc Vat)
Designed for a realm where functionality trumps all concerns, the Arca-Swiss C1 Cube simultaneously achieves mastery of control with an appearance approaching the status of jewelry. The head allows users to place their heavy cameras with a degree of accuracy they could never have had before except in exchange for a large increase in weight. There are still plenty of shooters around wishing to actually travel with their best stuff, and no geared head seemed practical to endure on one's person before the C1 arrived.
The C1 Cube has finely calibrated ungeared panning adjustments under and above ±28° x-y geared axes with adjustable tension. Why two panoramic axes? So that you can first center the Cube's controls to your position with the bottom axis, then readjust the camera to point dead ahead with the upper axis. The gears' knobs have a little scrap of rubber running around them, to give pinpoint control while wearing gloves without being broad enough to obstruct the head's movements. On the bottom of it all, there's a third (ungeared) hinge which allows 62° of tilt so that any camera can reach the 90° vertical position.
On top of the C1 you'll find 2 sensitive bubble levels and an Arca-Swiss flip-lock quick release clamp which has its own advantages in compactness and security. Given all that's going on here, the weight's astonishingly low; just 2.03 lbs (925g), as light as could be imagined and considerably more compact than other geared heads.
The C1's ultimate advantage lies in the world of macro shooting, where its design allows far fewer focusing readjustments while creating images. You see, all other geared heads (and all other 3-way pan/tilt heads for that matter) execute movements upon circular axes which are centered far below the actual camera-your gear moves along the outside of a sphere. The C1 Cube, however, places the camera inside of a sphere. It is almost as if the x/y axes meet at a point upon the image plane itself, with all the camera rotating around a stationary image plane. This remarkably difficult engineering feat was chosen to minimize movements of the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head w / Arca-Type Flip-Lock Quick Release" is 1.


1,434.14 (1,735.31 inc Vat)
Designed for a realm where functionality trumps all concerns, the Arca-Swiss C1 Cube simultaneously achieves mastery of control with an appearance approaching the status of jewelry. The head allows users to place their heavy cameras with a degree of accuracy they could never have had before except in exchange for a large increase in weight. There are still plenty of shooters around wishing to actually travel with their best stuff, and no geared head seemed practical to endure on one's person before the C1 arrived.
The C1 Cube has finely calibrated ungeared panning adjustments under and above ±28° x-y geared axes with adjustable tension. Why two panoramic axes? So that you can first center the Cube's controls to your position with the bottom axis, then readjust the camera to point dead ahead with the upper axis. The gears' knobs have a little scrap of rubber running around them, to give pinpoint control while wearing gloves without being broad enough to obstruct the head's movements. On the bottom of it all, there's a third (ungeared) hinge which allows 62° of tilt so that any camera can reach the 90° vertical position.
On top of the C1 you'll find 2 sensitive bubble levels and an Arca-Swiss flip-lock quick release clamp which has its own advantages in compactness and security. Given all that's going on here, the weight's astonishingly low; just 2.03 lbs (925g), as light as could be imagined and considerably more compact than other geared heads.
The C1's ultimate advantage lies in the world of macro shooting, where its design allows far fewer focusing readjustments while creating images. You see, all other geared heads (and all other 3-way pan/tilt heads for that matter) execute movements upon circular axes which are centered far below the actual camera-your gear moves along the outside of a sphere. The C1 Cube, however, places the camera inside of a sphere. It is almost as if the x/y axes meet at a point upon the image plane itself, with all the camera rotating around a stationary image plane. This remarkably difficult engineering feat was chosen to minimize movements of the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
This version of the C1 Cube is delivered with a gorgeous, handcrafted leather case with permanently-attached shoulder strap.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head w / Flip-Lock Quick Release & Leather Case" is 1.


1,171.46 (1,417.47 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release" is 1.


1,330.18 (1,609.52 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. This edition of the Cube comes in a fitted, stylish leather case. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release and Leather Case" is 1.


1,356.41 (1,641.26 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style with GP (Geared Panning) quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release with GP (Geared Panning)" is 1.


1,677.68 (2,029.99 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss' Classic style with GP (Geared Panning) quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with Arca FlipLock Release" is 1.


1,157.29 (1,400.32 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss MonoballFix system quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with MonoballFix Quick Release" is 1.


1,316.03 (1,592.40 inc Vat)
The Arca-Swiss C1 Cube is a three-axis panoramic head with a 66 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. This edition of the Cube comes in a fitted, stylish leather case. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss MonoballFix system quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube Geared Head with MonoballFix Quick Release and Leather Case" is 1.


1,866.67 (2,258.67 inc Vat)
When the manufacturer of the finest ball heads and view cameras of the finest, mechanical grade, designs a gearhead, the result is a 3-axis head like the Cube! Not only because of its construction, but also because of its iconic design, it has been the benchmark ever since. The Arca-Swiss Cube is without question the most advanced and precise tripod head on the market. Why is this so much more important today than it used to be? Whereas in the past the photographer had at least a 12cm wide film, today he has a sensor that is much smaller, i.e. you have to be able to work much more precisely. In order to be able to work efficiently with the horizontal and vertical lines that are important in both architectural and still life photography, it is essential to be able to pan the camera in the mm range. Without exception, every photographer to whom I lent the Cube bought it immediately or wants to own it as soon as possible. Which brings us to the next topic: The Cube's individual parts spend an entire day on milling machines operated by technicians who used to make the very finest mechanical watches in the Jura (Switzerland). The C1 Cube is perfect for landscape, still life and architectural photography, as it allows the photographer to adjust even heavy cameras with absolute accuracy. The Cube has two panoramic axes: the lower one at the base and the upper one for horizontal panning, e.g. for accurate panoramic shots. The fine gear mechanism allows fine adjustment of the X and Y axes. The two adjustment wheels are easy and smooth to operate due to the self-locking gear mechanism.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube GP (Geared Panning) MonoballFix (with Leather Bag)" is 1.


1,882.02 (2,277.24 inc Vat)
The C1 Cube GP Geared Tripod Head with Classic Knob 3-axis geared tripod head from Arca-Swiss, crafted for precision movement to efficiently work with strong horizontal and vertical compositional lines often found in both architectural photography and product photography. GP stands for Geared Panning and indicates that the upper panorama can optionally be independently pivoted or rotated with fine adjustment. The Cube has two panoramic axes: the lower one at the base of the head, and the upper axis with precise horizontal movement for exacting panorama shots. The finely geared mechanism allows fine adjustment of the X and Y axes, its two setting wheels move smoothly and easily thanks to the self-locking gear mechanism.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube GP Geared Tripod Head with Classic Knob" is 1.


1,899.06 (2,297.86 inc Vat)
The C1 Cube GP Geared Tripod Head with FlipLock 3-axis geared tripod head from Arca-Swiss, crafted for precision movement to efficiently work with strong horizontal and vertical compositional lines often found in both architectural photography and product photography. GP stands for Geared Panning and indicates that the upper panorama can optionally be independently pivoted or rotated with fine adjustment. The Cube has two panoramic axes: the lower one at the base of the head, and the upper axis with precise horizontal movement for exacting panorama shots. The finely geared mechanism allows fine adjustment of the X and Y axes, its two setting wheels move smoothly and easily thanks to the self-locking gear mechanism.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube GP Geared Tripod Head with FlipLock" is 1.


1,688.53 (2,043.12 inc Vat)
The C1 Cube GP Geared Tripod Head with MonoballFix 3-axis geared tripod head from Arca-Swiss, crafted for precision movement to efficiently work with strong horizontal and vertical compositional lines often found in both architectural photography and product photography. GP stands for Geared Panning and indicates that the upper panorama can optionally be independently pivoted or rotated with fine adjustment. The Cube has two panoramic axes: the lower one at the base of the head, and the upper axis with precise horizontal movement for exacting panorama shots. The finely geared mechanism allows fine adjustment of the X and Y axes, its two setting wheels move smoothly and easily thanks to the self-locking gear mechanism.
In stock
+

Minimum quantity for "Arca-Swiss C1 Cube GP Geared Tripod Head with MonoballFix" is 1.


1,064.89 (1,288.52 inc Vat)
In stock
+

Minimum quantity for "Arca-Swiss D4 Geared Pan "FlipLock"" is 1.


1,005.27 (1,216.38 inc Vat)
In stock
+

Minimum quantity for "Arca-Swiss D4 Geared Pan "MonoballFix"" is 1.


1,166.24 (1,411.15 inc Vat)
In stock
+

Minimum quantity for "Arca-Swiss D4 Geared Pan Classic" is 1.


850.98 (1,029.69 inc Vat)
Tilt and pivot your camera in three-dimensional space with the Arca-Swiss d4 Tripod Head with a Classic Knob Quick Release, which combines the advantages of a spherical head and a 3D tilt head in one compact system.
In stock
+

Minimum quantity for "Arca-Swiss d4 Tripod Head with a Classic Knob Quick Release (Geared)" is 1.


871.14 (1,054.08 inc Vat)
Tilt and pivot your camera in three-dimensional space with the Arca-Swiss d4 Tripod Head with a FlipLock Lever Quick Release, which combines the advantages of a spherical head and a 3D tilt head in one compact system.
In stock
+

Minimum quantity for "Arca-Swiss d4 Tripod Head with a FlipLock Lever Quick Release (Geared)" is 1.


632.67 (765.53 inc Vat)
Tilt and pivot your camera in three-dimensional space with the Arca-Swiss d4 Tripod Head with a MonoballFix Quick Release, which combines the advantages of a spherical head and a 3D tilt head in one compact system.
In stock
+

Minimum quantity for "Arca-Swiss d4 Tripod Head with a MonoballFix Quick Release (Geared)" is 1.


282.39 (341.69 inc Vat)
Bundling a unique support platform with a versatile tripod head, the Platypod Pro Max Camera Support with Arca-Swiss Monoball P0 Kit from includes the wide, low-profile support base and an Arca-Swiss ball head that utilizes locking rings to control it movements. Together, they combine to form a complete system for stabilized shooting at low and unconventional angles.
In stock
+

Minimum quantity for "Arca-Swiss Max Camera Support with Monoball P0 Kit" is 1.


484.35 (586.06 inc Vat)
The Monoball Z1g+ Ball Head from Arca-Swiss has a heavy-duty load capacity of 132 lb, and employs a Motion Related Gravity Control system for variable and bi-directional friction control that is independently operative on both axes. The head is smaller and lighter than its predecessor, the Z1.
In stock
+

Minimum quantity for "Arca-Swiss Monoball Classic Z1g+ Ball Head" is 1.


543.96 (658.19 inc Vat)
The Monoball Z1g+ Ball Head with Flip Lock from Arca-Swiss has a heavy-duty load capacity of 132 lb, and employs a Motion Related Gravity Control system for variable and bi-directional friction control that is independently operative on both axes. The head is smaller and lighter than its predecessor, the Z1.
In stock
+

Minimum quantity for "Arca-Swiss Monoball Classic Z1g+ Ball Head with Flip Lock" is 1.


Contact us for a price

Minimum quantity for "Arca-Swiss Monoball p0 Ball Head with Classic Quick Release" is 1.

Out of stock Add to wish list

699.74 (846.69 inc Vat)
The Monoball p0 Hybrid Ball Head Flip Lock Quick Release from Arca-Swiss has a unique design that combines the light weight and straight-forward simplicity of the original p0 head with the geared precision movements of the C1 Cube. The p0 Hybrid employs an aspheric ball with 3-point locking that enables smooth adjustments and secure lockdown, allowing the 1.1 lb support to handle loads up to 44 lb.
In stock
+

Minimum quantity for "Arca-Swiss Monoball p0 Hybrid Ball Head with Flip Lock Quick Release" is 1.


277.22 (335.44 inc Vat)
Arca-Swiss Monoball p0 Overview The Monoball p0 With Fliplock Quick Set Device is a sturdy, lightweight ball head for photography by Arca-Swiss. The...
In stock
+

Minimum quantity for "Arca-Swiss Monoball p0 With Fliplock Quick Set Device Ball Head" is 1.


208.62 (252.43 inc Vat)
The Arca-Swiss Monoball P0 Tripod Head with Panning System is a unique knobless tripod head featuring a design that abandons traditional locking knobs and replaces them with a three-element geared locking system. This system allows the head to be positioned at any angle. The Monoball P0 locking elements apply a uniform force around the ball, ensuring smooth camera movements along any axis. When the camera is placed directly on the ball and not on its neck, the movements are as stable as if they were on a rubber ring. The aspherical ball also prevents sudden camera movements. The panning system is located just below the camera mount, providing a panoramic rotation that remains in line with the vertical. The Monoball P0 has a tilt ball range of 90° and has 360° panning. It weighs only 9.9 oz (280.66 g) and will support equipment up to 44.1 lb (20 kg).
In stock
+

Minimum quantity for "Arca-Swiss Monoball P0 with Panning System" is 1.


219.83 (265.99 inc Vat)
Arca-Swiss Monoball p0 Overview The Arca-Swiss Monoball P0 Tripod Head Panning System and Slidefix QS Quick Release System is a unique knobless tripod...
In stock
+

Minimum quantity for "Arca-Swiss Monoball P0 with Panning System and Slidefix QS Quick Release System" is 1.


395.50 (478.56 inc Vat)
The Monoball P0+ with Classic Quick Release is a unique ball head from Arca-Swiss that continues their legacy of innovation with a minimalist comma knobless design that has been built with portability, simplicity comma and performance in mind. It can support up to 44 pounds and is comfortably able to carry a modern DSLR and lens while staying light and compact at only 15.3 ounces. The Monoball p0+ has an inverted, aspheric-shaped ball, which increases resistance as the camera is tilted further from the horizontal plane, stabilizing a heavy camera or long telephoto lens mounted on the head. Locking operation is facilitated by simply turning the highly visible knurled ring on the body of the head. It is easy to feather control between loose and firm lock, allowing for smooth and precise operation.
In stock
+

Minimum quantity for "Arca-Swiss Monoball P0+ with Classic Quick Release" is 1.