Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€0
  • ‎€6527
335.33 (405.75 inc Vat)
The Custom Brackets CB Gimbal is a gimbal-type tripod head that is similar to others in function, yet offers several innovative improvements. High-quality ball bearings used for the pan and tilt movement ensure smooth operation. This also means that the assembly never needs lubrication.
The CB Gimbal follows a modular design, meaning that it can be fully disassembled for travel purposes. A convenient setup/travel knob allows for easy locking of the lens (for when used during pan only operation). It can also be used to lock the swinging arm in place when traveling.
This Gimbal design with a horizontal swinging arm is especially useful for large telephoto lenses, like a 400mm f/2.8, 500mm f/4, or 600mm f/4 lens. It allows the entire weight of the camera and lens combination to be hung rather than balanced. By re-orienting the mounting clamp to a horizontal position (rather than vertical sidemount), it allows for a much easier way of installing the lens. In addition, it removes all the shear stress from the lens-collar on telephoto lenses.
In stock
+

Minimum quantity for "Custom Brackets CB Gimbal Tripod Head" is 1.


104.31 (126.22 inc Vat)
The PB343-27 Powerball Ball Head with 3 Controls and Arca Type Quick Release from Davis & Sanford provides three control knobs for ball tension control, ball lock and 360º panning movements. The separate controls allow smooth, precise positioning and firm locking. An Arca-Swiss style quick release enables you to easily remove the camera from the head and a safety lock helps prevent miscues that can damage your camera. A standard base with 3/8-16" screw thread is compatible with most tripods and monopods and with a load capacity of 27 lb, this head will hold almost any camera and lens combination including videocameras, medium format, DSLR, mirrorless and point and shoots. Two bubble levels allow for even alignment and precise composition.
In stock
+

Minimum quantity for "Davis & Sanford PB343-27 Powerball Ballhead with 3 Controls and Arca Type Quick Release" is 1.


155.38 (188.01 inc Vat)
The Davis & Sanford Pro 200 Photo Head is a very heavy duty three-way pan/tilt head designed for large format cameras.
In stock
+

Minimum quantity for "Davis & Sanford Pro 200 Photo Head" is 1.


134.10 (162.26 inc Vat)
A supremely heavy duty three-way pan/tilt head designed for large format cameras.
In stock
+

Minimum quantity for "Davis & Sanford Pro SH-200S Photo Head" is 1.


103.19 (124.86 inc Vat)
In stock
+

Minimum quantity for "Desmond 52mm Ball Head" is 1.


102.24 (123.71 inc Vat)
In stock
+

Minimum quantity for "Desmond 52mm Ball Head with DBA-2 Head" is 1.


144.85 (175.27 inc Vat)
In stock
+

Minimum quantity for "Desmond 55mm Low Profile Ball Head with Rapid DBA-2 Clamp" is 1.


153.38 (185.59 inc Vat)
In stock
+

Minimum quantity for "Desmond 55mm Low Profile Ball Head with Rapid Lever Clamp" is 1.


157.69 (190.80 inc Vat)
In stock
+

Minimum quantity for "Desmond 55mm Low Profile Ball Head with Rapid Screw Clamp" is 1.


68.14 (82.45 inc Vat)
The DB-44 Demon 44mm Ball Head with DAC-X1 Arca-Type Clamp from Desmond is a robust tripod ball head with an impressive 66 lb load capacity. The tension on the 44mm ball can be adjusted to resist the weight of large camera and lens combinations to prevent them from suddenly flopping over. It features dual portrait angle selector notches to make it easier to position heavy lenses and tension adjustment to offset the weight load.
In stock
+

Minimum quantity for "Desmond DB-44 Demon 44mm Ball Head with DAC-X1 Arca-Type Clamp" is 1.


110.76 (134.02 inc Vat)
The DLOW-40 Low-Profile Ball Head with Arca-Type QR Plate from Desmond is made with a low center of gravity for easy movement of large, heavy lenses. The adjustable tension on the 44mm ball reduces the possibility of the mounted lens or camera from flopping over, like with ordinary ball heads. This low-profile head is only 3.2" tall but boasts an impressive 44 lb load capacity. It features dual portrait angle selector notches to make easier to position heavy lenses and tension adjustment to offset the weight load.
In stock
+

Minimum quantity for "Desmond DLOW-40 Low-Profile Ball Head with Arca-Type QR Plate" is 1.


144.85 (175.27 inc Vat)
The DLOW-55 Low-Profile Ball Head with Arca-Type QR Plate from Desmond is made with a low center of gravity for easy movement of large, heavy lenses. The adjustable tension on the 55mm ball reduces the possibility of the mounted lens or camera from flopping over, like with ordinary ball heads. This low-profile head is only 3.9" tall but boasts an impressive 77 lb load capacity. It features dual portrait angle selector notches to make easier to position heavy lenses and tension adjustment to offset the weight load.
In stock
+

Minimum quantity for "Desmond DLOW-55 Low-Profile Ball Head with Arca-Type QR Plate" is 1.