Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€0
  • ‎€82
Contact us for a price
The 3.5mm Stereo Mini Phone to the Multi/Micro-USB Port on Sony Cameras is used to connect PocketWizard tranceivers to a remote camera. The cable is a pre-trigger type that wakes the camera to be triggered with a half-press, allowing it to meter and focus before triggering it with a full-press from another transceiver.
On backorder

Minimum quantity for "PocketWizard 3.5mm Stereo Mini Phone to the Multi/Micro-USB Port on Sony Cameras" is 1.

Out of stock Add to wish list

5.38 (6.51 inc Vat)
In stock
+

Minimum quantity for "PocketWizard Mpsms Adapter" is 1.


6.81 (8.24 inc Vat)
The 2.5mm Shutter Release Cable II from Impact is a coiled shutter release cable to connect a remote trigger to select Canon cameras. It features a 3-Pin connector for the camera paired with a 2.5mm sub-mini connector jack for the trigger.
In stock
+

Minimum quantity for "Impact 2.5mm Shutter Release Cable II for Canon Cameras with 3-Pin Connector" is 1.


6.81 (8.24 inc Vat)
The 2.5mm Shutter Release Cable II from Impact is a coiled shutter release cable to connect a remote trigger to select Nikon cameras. It features a DC-2 connector for the camera paired with a 2.5mm sub-mini connector jack for the trigger.
In stock
+

Minimum quantity for "Impact 2.5mm Shutter Release Cable II for Nikon Cameras with DC-2 Connector" is 1.


15.05 (18.21 inc Vat)
The Dot Line IR Flash Trigger with Hot Shoe is actually 2 products in one. It's got a cold shoe that slips into a standard metal shoe like one that you'd find on a camera bracket with a female PC connection on the side that uses an optional cord from the shoe to the camera. Alternatively, a 1/4"-20 tap on the bottom of the shoe allows you to mount it to a light stand or other support. The IR sensor in this unit will recognize a flash built into a typical DSLR up to 70 feet away and trigger the flash that is connected to the shoe.
In stock
+

Minimum quantity for "Dot Line IR Flash Trigger with Hot Shoe" is 1.


15.05 (18.21 inc Vat)
The Dot Line IR Flash Trigger Hot Shoe Adapter for Sony Speedlites allows you to use flashes with a standard hot shoe with Sony cameras.
In stock
+

Minimum quantity for "Dot Line IR Flash Trigger for Sony A Series Cameras" is 1.


15.08 (18.25 inc Vat)
Connect your Panasonic camera with its specialized sub-miniature connection to nearly any current PocketWizard radio system with this 3' PAN-ACC Pre-Trigger Remote Camera Cable. This pre-trigger design helps you get the most out of your setup with the ability to keep the camera awake and ready to fire as well as provide access to both half- and full-press functions when used with select radios. Additionally, an MSMM adapter is included for using older radio systems.
In stock
+

Minimum quantity for "PocketWizard PAN-ACC Pre-Trigger Remote Camera Cable (3')" is 1.


15.09 (18.26 inc Vat)
The Impact PowerSync 3.5mm Camera Release Cable allows you to connect Impact PowerSync, PocketWizard, Bowens and Elinchrom remote receivers to your camera. The length of the cable is 10" (25 cm). Use with the following cameras:
In stock
+

Minimum quantity for "Impact PowerSync 3.5mm Camera Release Cable for Canon 3-Pin Type Cameras" is 1.


15.80 (19.12 inc Vat)
The Dot Line Hot Shoe Photographic Slave Flash Unit is a slave flash unit with a hot shoe, designed for hot-shoe mount flash units on cameras. It also fits most flash accessory hot shoe mounts. This unit employs an optical triggering that requires no electrical connection to the camera. However, for this to work, there must be a master flash electrically connected to the camera. The slave attaches to the remote flash via the built-in hot shoe, senses the light from the master flash, and then triggers the remote flash to fire. The sensor cell must be positioned so that it can "see" direct or indirect light from the master flash. The bottom of the slave has a female 1/4-20 thread to accept any tripod or ball joint head. The slave also features a standard accessory foot that can be used for mounting into a standard accessory shoe. The unit boasts a range of up to 60' (18.3 m) from the master flash. No batteries or external power are required, other than the light from the master flash.
In stock
+

Minimum quantity for "Dot Line Hot Shoe Photographic Slave Flash Unit" is 1.


17.20 (20.81 inc Vat)
In stock
+

Minimum quantity for "PocketWizard S-Vpr1-Acc (Sony-Acc)" is 1.


17.20 (20.81 inc Vat)
In stock
+

Minimum quantity for "PocketWizard Pan-Acc" is 1.


17.27 (20.90 inc Vat)
The PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable connects to the camera's motor drive socket to enable your MultiMAX or FlexTT5 Pocket Wizard radio slave set to trigger the camera's shutter remotely. This pre-trigger cable is intended to keep the camera constantly "awake".
In stock
+

Minimum quantity for "PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable" is 1.