Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€0
  • ‎€82
15.80 (19.12 inc Vat)
The Dot Line Hot Shoe Photographic Slave Flash Unit is a slave flash unit with a hot shoe, designed for hot-shoe mount flash units on cameras. It also fits most flash accessory hot shoe mounts. This unit employs an optical triggering that requires no electrical connection to the camera. However, for this to work, there must be a master flash electrically connected to the camera. The slave attaches to the remote flash via the built-in hot shoe, senses the light from the master flash, and then triggers the remote flash to fire. The sensor cell must be positioned so that it can "see" direct or indirect light from the master flash. The bottom of the slave has a female 1/4-20 thread to accept any tripod or ball joint head. The slave also features a standard accessory foot that can be used for mounting into a standard accessory shoe. The unit boasts a range of up to 60' (18.3 m) from the master flash. No batteries or external power are required, other than the light from the master flash.
In stock
+

Minimum quantity for "Dot Line Hot Shoe Photographic Slave Flash Unit" is 1.


15.05 (18.21 inc Vat)
The Dot Line IR Flash Trigger Hot Shoe Adapter for Sony Speedlites allows you to use flashes with a standard hot shoe with Sony cameras.
In stock
+

Minimum quantity for "Dot Line IR Flash Trigger for Sony A Series Cameras" is 1.


15.05 (18.21 inc Vat)
The Dot Line IR Flash Trigger with Hot Shoe is actually 2 products in one. It's got a cold shoe that slips into a standard metal shoe like one that you'd find on a camera bracket with a female PC connection on the side that uses an optional cord from the shoe to the camera. Alternatively, a 1/4"-20 tap on the bottom of the shoe allows you to mount it to a light stand or other support. The IR sensor in this unit will recognize a flash built into a typical DSLR up to 70 feet away and trigger the flash that is connected to the shoe.
In stock
+

Minimum quantity for "Dot Line IR Flash Trigger with Hot Shoe" is 1.


24.91 (30.14 inc Vat)
Elinchrom EL11089 Overview This is an Elinchrom 3.5 mm Jack to EL-Amphenol Sync Cord. It is 16' (5 m) long, and it is used to hardwire Elinchrom flash...
In stock
+

Minimum quantity for "Elinchrom Sync Cord - Male 3.5mm to Elinchrom Amphenol - 16' (5m)" is 1.


6.81 (8.24 inc Vat)
The 2.5mm Shutter Release Cable II from Impact is a coiled shutter release cable to connect a remote trigger to select Canon cameras. It features a 3-Pin connector for the camera paired with a 2.5mm sub-mini connector jack for the trigger.
In stock
+

Minimum quantity for "Impact 2.5mm Shutter Release Cable II for Canon Cameras with 3-Pin Connector" is 1.


6.81 (8.24 inc Vat)
The 2.5mm Shutter Release Cable II from Impact is a coiled shutter release cable to connect a remote trigger to select Nikon cameras. It features a DC-2 connector for the camera paired with a 2.5mm sub-mini connector jack for the trigger.
In stock
+

Minimum quantity for "Impact 2.5mm Shutter Release Cable II for Nikon Cameras with DC-2 Connector" is 1.


15.09 (18.26 inc Vat)
The Impact PowerSync 3.5mm Camera Release Cable allows you to connect Impact PowerSync, PocketWizard, Bowens and Elinchrom remote receivers to your camera. The length of the cable is 10" (25 cm). Use with the following cameras:
In stock
+

Minimum quantity for "Impact PowerSync 3.5mm Camera Release Cable for Canon 3-Pin Type Cameras" is 1.


18.83 (22.78 inc Vat)
The Impact PowerSync 3.5mm Camera Release Cable allows you to connect Impact PowerSync, PocketWizard, Bowens and Elinchrom remote receivers to your camera. The length of the cable is 10" (25 cm). Use with the following cameras:
In stock
+

Minimum quantity for "Impact PowerSync 3.5mm Camera Release Cable for Nikon 10-pin Type Cameras" is 1.


35.42 (42.86 inc Vat)
Morris 690545 Overview Mount a shoe-mount flash onto this unit, then mount it to a light stand, and fire it from the flash on your camera,...
In stock
+

Minimum quantity for "Morris Popular Shoe Slave Adapter" is 1.


26.37 (31.91 inc Vat)
This Flash Slave Unit--Rotating from Nisha allows you to set up a portable flash that can be triggered by the light of your on-camera flash. This slave unit detects light in a 180° area and triggers a flash in its hot shoe. It has a shoe mount/tripod socket in the bottom and includes two PC female outlets. The slave unit is not affected by sunlight or incandescent light.
In stock
+

Minimum quantity for "Nisha Flash Slave Unit--Rotating" is 1.


17.32 (20.96 inc Vat)
This Nisha HTS-12M Hotshoe to Male PC with 16" Cord is an ideal accessory for shoe-mount flashes which don't feature a PC outlet for direct or remote triggering. Simply slip the shoe onto an optional stand adapter and connect to an extension sync cord or a radio receiver such as the PocketWizard which accepts a 3.5 mm miniplug.
In stock
+

Minimum quantity for "Nisha HTS-1635 Hotshoe to Male Mini with 16" Cord" is 1.


64.09 (77.55 inc Vat)
Fire three flashes from your Pocket Wizard Radio Slave with the Paramount Miniphone to 3 Hot Shoe Y-Sync Cord. It consists of three 10' long sections each ending with a standard hot shoe. One 1' section ends with a miniphone plug for the Pocket Wizard Radio Slave.
In stock
+

Minimum quantity for "Paramount Miniphone to 3 Hot Shoe Y-Sync Cord" is 1.


Contact us for a price
The 3.5mm Stereo Mini Phone to the Multi/Micro-USB Port on Sony Cameras is used to connect PocketWizard tranceivers to a remote camera. The cable is a pre-trigger type that wakes the camera to be triggered with a half-press, allowing it to meter and focus before triggering it with a full-press from another transceiver.
On backorder

Minimum quantity for "PocketWizard 3.5mm Stereo Mini Phone to the Multi/Micro-USB Port on Sony Cameras" is 1.

Out of stock Add to wish list

18.60 (22.51 inc Vat)
The PocketWizard CM-E3-ACC 3' Remote Camera Cable for Canon E3 Connection is used with the PocketWizard MultiMAX or FlexTT5 transceivers to provide remote shutter activation as well as "wake up" function to Canon cameras with the E3 connection, such as the entire Digital Rebel series. FlexTT5 transceiver's built-in hot shoe enables E-TTL flash exposure with remote camera triggering. Going beyond the standard PocketWizard pre-trigger cables, the CM-E3-ACC really does 2 things when combined with MultiMAX or FlexTT5 transceivers: It remotely fires the camera. It keeps the camera 'awake'.
In stock
+

Minimum quantity for "PocketWizard CM-E3-ACC 3' Remote Camera Cable for Canon E3 Connection" is 1.


25.77 (31.18 inc Vat)
Control half-press and full-press functions of your camera using your PocketWizard with this 1' PocketWizard CM-E3-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit from for cameras featuring the Canon E3 remote shutter terminal. This cable will even keep your camera awake and ready with Plus III and newer MultiMAX radios or with all PocketWizards using the bundled PTMM Pre-Trigger Adapter. Additionally, with the included MSMM Miniphone Adapter it can be used with older PocketWizard models.
In stock
+

Minimum quantity for "PocketWizard CM-E3-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit (1')" is 1.


17.27 (20.90 inc Vat)
The PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable connects to the camera's motor drive socket to enable your MultiMAX or FlexTT5 Pocket Wizard radio slave set to trigger the camera's shutter remotely. This pre-trigger cable is intended to keep the camera constantly "awake".
In stock
+

Minimum quantity for "PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable" is 1.


27.90 (33.76 inc Vat)
Control half-press and full-press functions of your camera using your PocketWizard with this 1' PocketWizard CM-N3-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit from for cameras featuring the Canon N3 remote shutter terminal. This cable will even keep your camera awake and ready with Plus III and newer MultiMAX radios or with all PocketWizards using the bundled PTMM Pre-Trigger Adapter. Additionally, with the included MSMM Miniphone Adapter it can be used with older PocketWizard models.
In stock
+

Minimum quantity for "PocketWizard CM-N3-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit (1')" is 1.


27.85 (33.70 inc Vat)
The PocketWizard HSFM3 Flash Sync Cable is a 3' cable that allows you to use a PocketWizard radio to remotely trigger shoe-mounted flashes without PC terminals. Its hot shoe connection features a 1/4"-20 thread for mounting the flash off-camera.
In stock
+

Minimum quantity for "PocketWizard HSFM3 Flash Sync Cable (3')" is 1.


5.38 (6.51 inc Vat)
In stock
+

Minimum quantity for "PocketWizard Mpsms Adapter" is 1.


19.01 (23.00 inc Vat)
The Pocket Wizard N-MCDC2-ACC 3' Nikon Remote Camera Cable for Nikon is used with the Pocket Wizard MultiMAX, FlexTT5 or Plus III transceivers to provide remote shutter activation as well as "wake up" function to Nikon cameras with the DC2 connection, such as the D90, D5000 and D7000. When the camera is attached to the MultiMAX/FlexTT5 transceiver and another PocketWizard transceiver sends the firing signal, the camera will be remotely fired on command. When transmitting from a MultiMAX, pressing a Zone button can also activate or deactivate the remote MultiMAX or FlexTT5 to electronically ready the camera for the next firing. This is necessary when using the MultiMAX or FlexTT5 to fire Nikon cameras with the DC2 connection.
In stock
+

Minimum quantity for "PocketWizard N-MCDC2-ACC 3' Nikon Remote Camera Cable for Nikon" is 1.


26.39 (31.93 inc Vat)
Control half-press and full-press functions of your camera using your PocketWizard with this 1' PocketWizard N-MCDC2-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit from for cameras featuring the Nikon MC-DC2 remote shutter terminal. This cable will even keep your camera awake and ready with Plus III and newer MultiMAX radios or with all PocketWizards using the bundled PTMM Pre-Trigger Adapter. Additionally, with the included MSMM Miniphone Adapter it can be used with older PocketWizard models.
In stock
+

Minimum quantity for "PocketWizard N-MCDC2-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit (1')" is 1.


17.35 (20.99 inc Vat)
The PocketWizard N10-ACC 3' Remote Camera Cable for Nikon 10-Pin Cameras connects to your Nikon camera's 10-pin electronic release socket to enable your MultiMAX, FlexTT5, PlusX or Plus III PocketWizard radio slave set to trigger the camera's shutter remotely. This pre-trigger cable is intended to keep the camera constantly "awake". The pre-trigger switch can be set on or off to save battery energy. Once set on the "awake" mode, the camera will trigger much faster but will also use up more battery power.
In stock
+

Minimum quantity for "PocketWizard N10-ACC 3' Remote Camera Cable for Nikon 10-Pin Cameras" is 1.


27.16 (32.86 inc Vat)
Control half-press and full-press functions of your camera using your PocketWizard with this 1' PocketWizard N10-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit from for cameras featuring the Nikon 10-Pin remote shutter terminal. This cable will even keep your camera awake and ready with Plus III and newer MultiMAX radios or with all PocketWizards using the bundled PTMM Pre-Trigger Adapter. Additionally, with the included MSMM Miniphone Adapter it can be used with older PocketWizard models.
In stock
+

Minimum quantity for "PocketWizard N10-ACC-1 Remote Camera Cable with PTMM Pre-Trigger Adapter Kit (1')" is 1.


22.60 (27.35 inc Vat)
The PocketWizard N10-ACC-D200 3' Remote Camera Cable is also compatible with the Plus X and Plus III. The cable connects to the camera's motor drive socket to enable your PocketWizard radio slave set to trigger the camera's shutter remotely. The pre-trigger cable is intended to keep the camera constantly "awake." The pre-trigger switch can be set on or off to save battery energy. Once set on the "awake" mode, the camera will trigger much faster but will also use up more battery power. The cable will not work with the Nikon D700, D800, D800E, or D4 cameras. Use N10-ACC (formerly N90M-ACC-ND) instead.
In stock
+

Minimum quantity for "PocketWizard N10-ACC-D200 3' Remote Camera Cable" is 1.