Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
Brand
Price

 – 

  • ‎€0
  • ‎€36208
97.11 (117.50 inc Vat)
This 12 Survivors Windom 65 Hiking Backpack will carry your gear and keep you comfortable when you're ready to hit the trail or back country. The fully adjustable pack has a support system comprised of backpack straps, aluminum stays, a waist belt, a sternum strap, and a torso length adjustment, so it accommodates users of all shapes and sizes, even if you're layering against the cold. This large 65L pack has pockets inside and out for your small items, plus front and top zippered openings into the main compartment. The ripstop nylon is naturally water resistant to keep your gear dry in light rain or mist, but if the weather takes a turn for the wetter 12 Survivors has integrated a waterproof rain fly for maximum wetness protection.
In stock
+

Minimum quantity for "12 Survivors Windom 65 Hiking Backpack" is 1.


119.20 (144.23 inc Vat)
The blue AirHed Pro Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Ball Head (Blue)" is 1.


119.20 (144.23 inc Vat)
The gray AirHed Pro Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Ball Head (Gray)" is 1.


111.75 (135.22 inc Vat)
The blue AirHed Pro Lever Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Lever Ball Head (Blue)" is 1.


111.77 (135.24 inc Vat)
The gray AirHed Pro Lever Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Lever Ball Head (Gray)" is 1.


126.67 (153.27 inc Vat)
The AirHed Vu Ball Head from 3 Legged Thing is a ball head with a load capacity of 88.2 lb that can be attached to tripods or other support systems that feature a 3/8"-16 mount. The head's magnesium alloy casing features a unique vision panel that allows the inner mechanism to be seen. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, and fully tilted to a vertical position or returned to its upright position. The base of the head incorporates an independent panning lock knob.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Vu Ball Head (Blue)" is 1.


126.67 (153.27 inc Vat)
The AirHed Vu Ball Head from 3 Legged Thing is a ball head with a load capacity of 88.2 lb that can be attached to tripods or other support systems that feature a 3/8"-16 mount. The head's magnesium alloy casing features a unique vision panel that allows the inner mechanism to be seen. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, and fully tilted to a vertical position or returned to its upright position. The base of the head incorporates an independent panning lock knob.
In stock
+

Minimum quantity for "3 Legged Thing AirHed Vu Ball Head (Gray)" is 1.


129.02 (156.11 inc Vat)
The Alan 2.0 Carbon Fiber Monopod from 3-Legged Thing is built for versatility and resilience and has been designed with a number of enhancements over its predecessor, including the beautifully contoured Tri-mount plate, new Parallel leg twist lock joints for improved grip, and internal anti-rotation Chicken Lips joint shims for improved rigidity and stability. This five-section support can be used for still photos and videography and has a load capacity of 132.2 lb. It is well suited for wildlife, sports, and action photography and can be used where tripods are not allowed or cannot easily travel. Each of the five sections have a twist-lock that opens with a 1/4 turn and has a maximum height of 58.7". The lightweight carbon fiber monopod weighs just 1.3 lb and collapses to a closed length of 17.7", which fits in most backpacks and carry-on luggage.
In stock
+

Minimum quantity for "3 Legged Thing Alan 2.0 Carbon Fiber Monopod (Metallic Slate Gray)" is 1.


172.03 (208.16 inc Vat)
The Alan 2.0 Carbon Fiber Monopod with DocZ2 Foot Stabilizer Kit from 3 Legged Thing pairs the robust Alan 2.0 Carbon Fiber Monopod with the collapsible DocZ2 Foot Stabilizer to create a versatile travel kit for still and video imaging. The added stability of the folding foot stabilizer enhances image clarity when shooting wildlife, sports, and other action.
In stock
+

Minimum quantity for "3 Legged Thing Alan 2.0 Carbon Fiber Monopod with DocZ2 Foot Stabilizer Kit (Metallic Slate Gray)" is 1.


260.81 (315.58 inc Vat)
This bronze 3 Legged Thing Albert 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 49.4" height or can be combined with the center column to form a monopod with up to 74.6" in height.
In stock
+

Minimum quantity for "3 Legged Thing Albert 2.0 Tripod (Bronze)" is 1.


260.81 (315.58 inc Vat)
This gray 3 Legged Thing Albert 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 49.4" height or can be combined with the center column to form a monopod with up to 74.6" in height.
In stock
+

Minimum quantity for "3 Legged Thing Albert 2.0 Tripod (Gray)" is 1.


335.33 (405.75 inc Vat)
This bronze and blue 3 Legged Thing Tripod Kit includes a bronze Albert 2.0 Tripod and blue AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 52.9" height or can be combined with the center column to form a monopod with up to 78.1" in height.
In stock
+

Minimum quantity for "3 Legged Thing Albert 2.0 Tripod Kit with AirHed Pro Ball Head (Bronze and Blue)" is 1.