Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

3 Legged Thing AirHed Pro Lever Ball Head (Blue)

new, AHPRO-LV-BLUE, NA
111.75
(135.22 inc Vat)
Price in points: 112 points
3LAHPROLVBLU
In stock
+

Minimum quantity for "3 Legged Thing AirHed Pro Lever Ball Head (Blue)" is 1.


3 Legged Thing AIRHED PRO Overview

The blue AirHed Pro Lever Ball Head from 3 Legged Thing is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8-16 mount. Cameras or accessories that are compatible with a 1/4-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.
Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

AirHed Pro Lever Ball Head

Arca-type ball head with 88 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
Secondary locking knob with knurled surface allows head to rotate 360°
Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
Push-and-pull cam lock lever to secure compatible Arca-type quick release plates within the integrated clamp
When opened, cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right or left-handed user
Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations
Durable magnesium alloy construction

QR-OCTA Quick Release Plate

Compatible with Arca-type quick release clamps
1/4"-20 mount
Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Lever Ball Head
Durable, aluminum alloy construction

User Manual (612746.pdf, 4,275 Kb) [Download]

+

3 Legged Thing AIRHED PRO Specs

Head TypeBall Head
Base Mount3/8"-16 Female
Camera Mounting Screw1/4"-20 Male
Quick Release Plate TypeArca-Type
Load Capacity88 lb / 39.92 kg
Number of Bubble Levels1
Friction ControlNo
Independent Pan LockYes
MaterialMagnesium
Vertical Tilt90°
Panning Range360°
Ball Sphere Diameter1.18" / 30 mm
DimensionsH: 3.5" / H: 89.0 mm
Weight0.72 lb / 0.33 kg
Package Weight0.915 lb
Box Dimensions (LxWxH)4.8 x 4.1 x 4"

3 Legged Thing AirHed Pro Lever Ball Head (Blue)

QR-OCTA Quick Release Plate

1/4"-20 Stagsden Camera Bolt

5-Year Warranty

Recently Viewed